Safety Technician
- Home
- Safety Technician
Safety Technicians: Occupational Risk Assessment Study – Legislation
What is a company's safety technician
In general, the safety technician acts as an adviser to the employer on hygiene, safety and accident prevention in the workplace.
This advice is given both verbally and in writing in a special company logbook, which is certified by the Labour Inspectorate and in which the employer signs to confirm they have been informed.
What is the legislation on safety technicians
According to the legislation (Presidential Decree 17/96, article 4, paragraphs 1 and 2), even businesses employing just one (1) employee are required to have a safety technician.
It is important to know that businesses are divided into three main categories according to their level of risk.
Business risk categories
- Category A – High risk, covering:
mines, quarries, industries processing hazardous materials and, in general, workplaces with a high likelihood of serious accidents due to the nature of the work.
- Category B – Medium risk, covering:
food and beverage industries, workshops, fishing activities, etc.
- Category C – Low risk, covering:
Services, hotels and tourism businesses, commercial businesses, educational and livestock businesses, etc.
If a business has activities belonging to more than one category, it consults the competent authority for guidance. In general, the category it falls into depends on the share of its activities in each category.
What are the general duties of the safety technician?
The duties of the safety technician are set out precisely in articles 6 and 7 of Law 1568/85
- They advise on the design, planning, construction and maintenance of facilities, the introduction of new production processes, the procurement of tools and equipment, the selection and checking of the effectiveness of personal protective equipment, the configuration and arrangement of workstations and the working environment, and, in general, the organisation of the production process,
- They check the safety of facilities and technical equipment before they are put into operation, as well as production processes and working methods before they are applied, and they supervise the implementation of occupational health and safety and accident prevention measures, informing the department heads or the company’s management accordingly
The Safety Technician has the following obligations
- To regularly inspect workstations in terms of occupational health and safety, report any failure to apply health and safety measures to the employer, propose measures to address it and supervise their implementation,
- To supervise the correct use of personal protective equipment,
- To investigate the causes of workplace accidents, analyse and evaluate the results of their investigations and propose measures to prevent similar accidents.
- To supervise fire safety and alarm drills to verify readiness to deal with accidents.
- To ensure that the company’s employees comply with occupational health and safety rules, and to inform and guide them on preventing the occupational risks involved in their work,
- To take part in preparing and implementing employee training programmes on occupational health and safety.
An extremely important obligation of the safety technician is to maintain workplace confidentiality.
Find out the exact cost now from Fouskas Construction
CALL US
VISΙΤ US
OPENING HOURS
- Monday - Friday: 09.00-17.00
- Saturday: 09.00-14.00
Learn everything about the responsibilities of the Safety Technician
What is a o company’s safety technician?
In general, the safety technician acts as an adviser to a company’s employer on hygiene, safety, emergency response organisation, recommending safe working methods and accident prevention in the workplace. All of these are essential for improving the safety of your company’s employees. The safety technician keeps up with all developments in their field and is clearly essential for anyone employing staff in offices, construction sites, workshops or industrial facilities.
They provide the right advice to ensure the smooth operation of your business and a safe working environment. This advice and these instructions are given both verbally and in writing in a special paginated company logbook, which is certified by the Labour Inspectorate and in which the employer signs to confirm they have been informed.
Employee safety is the most important thing in a business, which is why you need to be particularly careful and thorough in complying with the law. In the event of violations and non-compliance during a Labour Inspectorate inspection, strict penalties and even stricter fines apply.
What is the legislation on safety technicians?
According to the legislation (Presidential Decree 17/96, article 4, paragraphs 1 and 2), even businesses employing just one (1) employee are required to have a safety technician and to take “measures to improve the safety and health of employees at work”. The responsibilities of the safety technician are described in detail in articles 6 and 7 of Law 1568/85 and in Presidential Decree 17/96.
In addition, in businesses employing 50 or more employees, the employer is obliged to use the services of a safety technician and an occupational physician. Depending on the risk level of each business and the number of employees, as provided for by Presidential Decrees 297/88 and 17/96, the minimum working time of the safety technician and their required formal qualifications are determined. It is therefore clear that in all private and public sector businesses, regardless of their economic sector and number of employees, the employer is obliged to provide employees with protection and prevention services.
According to Circular 130297/15-7-1996 of the Ministry of Employment and Social Protection, which explains Presidential Decree 17/1996: “The employer is responsible for the safety and health of the employees in their business and is not released from this responsibility either when employees do not comply with their obligations, or when they assign the duties of protection and prevention of occupational risk to the Safety Technician and/or the Occupational Physician and/or competent External Protection and Prevention Services (EXYPP)”.
It is also important to know that businesses are divided into three main categories according to their level of risk.
Business risk categories
- Category A – High risk, covering:
mines, quarries, industries processing hazardous materials and, in general, workplaces with a high likelihood of serious accidents due to the nature of the work. In Category A businesses, the employer is obliged to use the services of a safety technician with the qualifications set out in subparagraphs a, b or c of paragraph 1 of article 5 of Law 1568/85.
- Category B – Medium risk, covering:
food and beverage industries, workshops, fishing activities, etc. In Category B businesses (which include all businesses not falling under Categories A and C), the employer is obliged to comply with the requirements of subparagraph (a). However, regarding the safety technician, they may assign these duties to employees with the qualifications of subparagraph (d), provided they work full-time in the business.
- Category C – Low risk, covering:
services, hotels and tourism businesses, commercial businesses, educational and livestock businesses, etc. In Category C businesses – i.e. low-risk businesses in sectors such as agriculture, trade, livestock farming, restaurants, hotels, communications, transport, storage, banks, financial institutions, insurance, administrative and financial services, etc. – with fewer than 50 employees, the safety technician may be a university graduate with at least 2 years’ service, or a technological institute (TEI) graduate with at least 5 years’ experience, with a specialisation as defined in Presidential Decree 294/88 for each sector of activity.
If a business has activities belonging to more than one category, it consults the competent authority for guidance. In general, the category it falls into depends on the share of its activities in each category.
How many hours a year must the safety technician work?
Based on the above categorisation, Presidential Decree 294/88 (article 3) sets coefficients which, multiplied by the number of employees, give the minimum annual working hours of the safety technician for each category of business, distributed by month by joint agreement between the employer and the Occupational Health and Safety Committee.
These hours must in no case be fewer than 25 hours for businesses employing up to 20 employees, 50 hours for businesses employing 20 to 50 employees, and 75 hours for businesses employing more than 50 people (Presidential Decree 17/96, article 4, paragraph 3). Certain cases of seasonal businesses are exempt, and a relevant circular covers them.
What are the general duties of the safety technician?
The duties of the safety technician are set out precisely in articles 6 and 7 of Law 1568/85, with the aim of ensuring the safe and smooth operation of every business.
- They advise, for the purposes of prevention and protection, on the design, planning, construction and maintenance of facilities, the introduction of new production processes, the procurement of tools and equipment, the selection and checking of the effectiveness of personal protective equipment, the configuration and arrangement of workstations and the working environment, and, in general, the organisation of the production process,
- They check the safety of facilities and technical equipment before they are put into operation, as well as production processes and working methods before they are applied, and they supervise the implementation of occupational health and safety and accident prevention measures, informing the department heads or the company’s management accordingly
- They regularly inspect workstations in terms of occupational health and safety and report any failure to apply health and safety measures to the employer.
By agreement with clients, the Safety Technician may also provide the following services:
- Occupational Risk Assessment
- Creation of evacuation & rescue plans and preparation of Emergency Procedures (fire, earthquake, terrorist attack, etc.)
- Health and Safety Training
- Measurements of workplace environmental factors (physical, chemical and biological factors) using specialised equipment
Occupational Risk Assessment Study
The Occupational Risk Assessment Study (MEEK) is mandatory under current legislation (Presidential Decrees 17/96 and 19/96) on health and safety in the workplace. So, in addition to hiring a Safety Technician, every employer must ensure that a written Occupational Risk Assessment Study is prepared for their business. The risk assessment study is prepared by the safety technician in cooperation with the employer or the relevant departments that manage the business.
The objectives of the Occupational Risk Assessment Study are:
- Identifying the risks to employees’ safety
- Identifying the factors that adversely affect employees’ health
- Finding ways and methods to make employees’ daily work easier
The Safety Technician has the following obligations, with the aim of improving working conditions in the business:
- To regularly inspect workstations in terms of occupational health and safety according to the programme agreed with the client, report any failure to apply health and safety measures to the employer, propose measures to address it and supervise their implementation.
- To supervise the correct use and effectiveness of personal protective equipment.
- To investigate the causes of workplace accidents, record them in a special logbook, analyse them, evaluate the results of their investigations and propose measures to prevent similar accidents.
- To assess and check the level of risk for each workstation, record the existing risks in the workplace and propose safety measures.
- To supervise and coordinate fire safety and alarm drills to verify readiness to deal with accidents.
- To evaluate fire protection, emergency and evacuation systems.
- To ensure that the company’s employees comply with occupational health and safety rules, and to inform and guide them on preventing the occupational risks involved in their work.
- To take part in preparing and implementing employee training programmes on occupational health and safety. The frequency of training talks on these subjects depends on the size of the business and the nature of the risks it faces.
- To distribute safe working instructions for the training and information of staff, the number and content of which depend on the size of the business and the nature of the risks it faces. The aim is for the instructions to cover the business’s main activities and its most significant risks.
It should be stressed here that training talks and safe working instructions, beyond their direct practical result of raising staff awareness and keeping them informed, are very useful because they provide ongoing proof of the business’s commitment to promoting health and safety.
Another extremely important obligation of the safety technician is to maintain workplace and business confidentiality.
Benefits of a Safety Technician
Choosing a specialised safety technician brings your business numerous benefits and helps fully cover all the situations and undesirable incidents that may arise in a workplace. The benefits are therefore many and include:
- Legal protection and full compliance with legal provisions
- Protection against, and a reduction in, workplace accidents
- The employer’s written, responsible acceptance of responsibility for protecting their employees
- Employees’ commitment to the company, because they see the business’s concern for their safety, and
- Better work results, as employees will feel safe in the business they work for and will trust their employer even more
Choosing a Safety Technician
With many years of experience in Occupational Health and Safety, our company responsibly supports your business with the best-trained safety technicians. Our aim is always to offer you top-quality services for the effective prevention of occupational risk. For any questions or needs, you can contact us directly.